|
 3d Retreat Forums
 Tech/Hardware
 amd 1.0/128MB and a SB TNT2 Ultra
|
 UBBFriend: Email This Page to Someone! |
next newest topic | next oldest topic |
| Author | Topic: amd 1.0/128MB and a SB TNT2 Ultra | ||
|
DieNadel Newbie 
Posts: 2 |
Just built the system and it seems to lock more than my PIII 450 did, (While playing RS and family. I did have the Creative Labs TNT2 Ultra in the PIII and it was fine. Anyone out there with a similar build than can offer tips? Tks       
| ||
|
Steelhead Newbie
Posts: 2 |
I had the same problem after I built mine. The installation order of the drivers and DirectX seems to be critical with our setups...even with a virgin install. You will probably have to do a complete wipe of the drivers and reinstall starting with the VIA 4in1 (VIA chipset right?). Its not as easy as it used to be  Take a look here http://www3.sk.sympatico.ca/forte/videocrd.html and follow the directions. Worked for me!Good luck ------------------
|
All times are CST (US) | next newest topic | next oldest topic |
  |
|
3d Retreat © 2000
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.47
posted 12-24-2000 11:54 PM