Specifications
CCITT DATACOMM STANDARDS:
56000bps (56Kflex and V90), 33600bps
and 28800bps (ITU-T V34), 14400bps
(ITU-T V32bis), 9600 bps (ITU-T V32),
2400bps, (ITU-T V22bis), 1200bps (ITU-T
V22), 300 bps (ITU-T V21). 75/1200bps,
1200/75bips (ITU-T V23)

CCITT FAX STANDARDS: 14000bps
(ITU-TV17), 9600bps (UIT-TV29) 4800bps
(ITU-TV27ter), 300bps (ITU-TV21 ch2)
CONNECTIONS:
Supports ITU-TV8/V8bis fast connect
protocol.

COMMAND LANGUAGE:
DATA AND VOICE: classic AT and Olitec
extended command set.

PROTOCOLS:
DATA: error correction (ITU-T V42,
MNP4), data compression (ITU-T V42bis,
MNPS), optimization (MNP10).

FAX: group3 send and receive, high or
low resolution (ITU-TT4), (ITU-TT30),
class 1 and 2.

VOICE: FULL DUPLEX SPEAKERPHONE
(hands-free) stand microphone, external
amplifier connector, video conferencing
V80 (H324), ADPCM audio coding.

DTE-DCE:
SPEED: automatic detection from 300 to
115200 bps
FLOW CONTROL: XON/XOFF,
RTS/CTS.
INTERFACE: serial
CONNECTOR: 9 pin female
TELEPHONE CONNECTOR: RJ11

FLASH MEMORY:
Flash upgradeable modem

AUDIO OUTPUT:
3.5mm female stereo jack to connect
external amplifier or headset (not
supplied) for hands-free operation.

AUDIO INPUT:
3.5mm female stereo jack to connect
supplied stand microphone for hands-free
operation and recording outgoing
message.

DIMENSIONS:
100MM x 153MM x 23MM; 4" x 6" x
7 /8 "

SOFTWARE SUPPLIED:
OLICOM-OLIFAX/VOICE-FOTOWIN*
GUARANTEE:
3 years (except SmartMedia Card*)

MINIMUM SYSTEM REQUIREMENTS:
Windows 3.1, 3.11, 95 or 98, 486 with 8
MB of RAM, hard disk, SVGA screen,
floppy disk drive, CD ROM drive.
Macintosh System 7.5, 8MB RAM, hard
disk, high density floppy disk drive, CD
ROM drive.